Ramp Transition Profile | Aluminium | Heights up to 11 mm | Self-adhesive | 38 mm
Select Colour:Sahara
Quantity:
- TÜV certified
- Suitable for various floor coverings
- Easy to install
- Up to 11 mm high
- Self-adhesive backing
Aluminium Ramp Profile - Self-adhesive
Profile Area of Application
These profiles are designed to provide a flush finish to floors with slight height differences. The profiles are suitable for all floor types and are installed with an adhesive strip.
Before installation, we advise leaving the profile to acclimate for approximately 12 - 24 hours so that the adhesive is at room temperature for bonding. The flooring should also be cleaned with an alcohol cleaner at the point of application to ensure a firm bond.
If necessary, the bonding surface can be pre-treated with a bonding agent. Once the surface is prepared, remove the adhesive tape, place the profile, and apply sufficient pressure.
Aluminium finishing profile - product characteristics:
- Material: aluminium
- Height compensation of up to 11 mm
- Material: EN AW 6063 (DIN EN 573)
- Material condition: T6 (DIN EN 755-2)
- Pre-treatment: E6 (DIN EN 17611)
- Layer thickness anodising: Class 15 (DIN EN 17611)
- Width: 38 mm
- Length: 100 cm
- Colours: Sahara, silver, stainless steel matt, black
- Mounting type: self-adhesive
